Network Diag - Leviton 47611-GT4 User Manual

Network Diagnostics
This screen allows you to perform a "Ping" or a DNS lookup. These activities can be useful in
solving network problems.
An example Network Diagnostics screen is shown below.
Data - Network Diagnostics Screen
Ping
Ping this Enter the IP address you wish to ping. The IP address can be on your
LAN, or on the Internet. Note that if the address is on the Internet,
IP Address
and no connection currently exists, you could get a "Timeout" error.
In that case, wait a few seconds and try again.
Ping Button After entering the IP address, click this button to start the "Ping"
procedure. The results will be displayed in the Ping Results pane.
DNS Lookup
Domain Enter the Domain name or URL for which you want a DNS (Domain
Name Server) lookup. Note that if the address in on the Internet, and
name/URL
no connection currently exists, you could get a "Timeout" error. In
that case, wait a few seconds and try again.
Lookup Button After entering the Domain name/URL, click this button to start the
"DNS Lookup" procedure.
Figure 40: Network Diagnostics Screen
Advanced Administration
65