Leviton 47611-GT4 User Manual
  1. Manuals
  2. Brands
  3. Leviton Manuals
  4. Gateway
  5. 47611-GT4
  6. User manual

Leviton 47611-GT4 User Manual

Broadband internet access 4-port switch internet gateway
Hide thumbs Also See for 47611-GT4:
Table of Contents

Advertisement

Quick Links

See also: Installation Instructions & Owner's Manual
47611 – GT4
Internet Gateway
Broadband Internet Access
4-Port Switch
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Leviton 47611-GT4

Summary of Contents for Leviton 47611-GT4

  • Page 1 47611 – GT4 Internet Gateway Broadband Internet Access 4-Port Switch User's Manual...

  • Page 3: Table Of Contents

    Table of Contents CHAPTER 1 INTRODUCTION ... 1 Internet GatewayFeatures ... 1 Package Contents ... 3 Physical Details... 4 CHAPTER 2 INSTALLATION... 6 Requirements... 6 Procedure ... 6 CHAPTER 3 SETUP ... 9 Overview ... 9 Configuration Program ... 10 Setup Wizard ...
  • Page 4 APPENDIX A TROUBLESHOOTING ... 80 Overview ... 80 General Problems ... 80 Internet Access... 80 APPENDIX B SPECIFICATIONS... 82 Multi-Function Internet Gateway... 82 Regulatory Approvals ... 83 Copyright © 2004. All Rights Reserved. Document Version: 1.3 (August, 2004) All trademarks and trade names are the properties of their respective owners.

  • Page 5: Chapter 1 Introduction

    Chapter 1 Introduction This Chapter provides an overview of the Internet Gateway’s features and capabilities. Congratulations on the purchase of your new Internet Gateway. The Internet Gateway is a multi-function device providing the following services: • Shared Broadband Internet Access •...

  • Page 6: Advanced Internet Functions

    Internet Gateway User Guide Advanced Internet Functions • Communication Applications. as interactive Games, Telephony, and Conferencing, which are often difficult to use when behind a Firewall, is included. • Special Internet Applications. port numbers are normally blocked by the Firewall. The ability to define and allow such applications is provided to enable such applications to be used normally.

  • Page 7: Package Contents

    • Stateful Packet Inspection Firewall. incoming server requests are filtered, thus protecting your network from malicious attacks from external sources. • Protection Against DoS attacks. Internet connection with invalid packets and connection requests, using so much band- width and so many resources that Internet access becomes unavailable. The Internet Gateway incorporates protection against DoS attacks.

  • Page 8: Physical Details

    Internet Gateway User Guide Physical Details Front-mounted LEDs Figure 2: Front Panel Power On - Power on. Off - No power. Status (Red) On - Error condition. Off - Normal operation. Blinking - This LED blinks during start up. For each port, there are 2 LEDs •...

  • Page 9: Rear Panel

    Rear Panel Figure 3: Rear Panel This button has two (2) functions: Reset Button • Reboot. When pressed and released, the Internet Gateway will reboot (restart). • Clear All Data. This button also can be used to clear ALL data and restore ALL settings to the factory default values.

  • Page 10: Chapter 2 Installation

    Chapter 2 Installation This Chapter covers the physical installation of the Internet Gateway. Requirements • Network cables. Use standard Cat5 or Cat5e cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. • For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for WAN port usage) Procedure Figure 4: Installation Diagram...
  • Page 11 Once the Internet Gateway firmware is contacted, you should see a prompt for a user name and password. Leave the user name field blank and type “Leviton” in lower case in the pass- word field. The password is case sensitive, so do not include the quotation marks.

  • Page 12: Check The Leds

    Internet Gateway User Guide • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 5.

  • Page 13: Chapter 3 Setup

    Chapter 3 Setup This Chapter provides Setup details of the Internet Gateway. Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration • Assigning a Password to protect the configuration data. PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Con- figuration.

  • Page 14: Configuration Program

    Internet Gateway User Guide Configuration Program The Internet Gateway contains an HTTP server. This enables you to connect to it, and config- ure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers: •...
  • Page 15 If you can't connect If the Internet Gateway does not respond, check the following: • The Internet Gateway is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command: •...

  • Page 16: Setup Wizard

    Internet Gateway User Guide Setup Wizard The first time you connect to the Internet Gateway, the Setup Wizard will run automatically. (The Setup Wizard also will run if the Internet Gateway’s default settings are restored.) 1. Step through the Wizard until finished. •...
  • Page 17 PPTP PPTP is mainly used in Europe. You connect to the ISP only when required. The IP address is usually allocated automati- cally, but may be Static (Fixed). Other Modems (e.g. Broadband Wireless) Type Details Dynamic Your IP Address is allocated IP Address automatically, when you con- nect to you ISP.

  • Page 18: Home Screen

    Internet Gateway User Guide Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. Figure 5: Home Screen Navigation &...

  • Page 19: Lan Screen

    LAN Screen Use the LAN link on the main menu to reach the LAN screen. An example screen is shown below. Figure 6: LAN Screen Data - LAN Screen TCP/IP IP Address IP address for the Internet Gateway, as seen from the local LAN. Use the default value unless the address is already in use or your LAN is using a different IP address range.
  • Page 20 Internet Gateway User Guide DHCP What DHCP Does A DHCP (Dynamic Host Configuration Protocol) Server allocates a valid IP address to a DHCP Client (PC or device) upon request. • The client request is made when the client device starts up (boots). •...

  • Page 21: Password Screen

    (If no password has been set, this dialog will not appear.) Figure 8: Password Dialog • Leave the "User Name" blank. • Enter the password for the Internet Gateway, as set on the Password screen above. (By default, it is “Leviton”). Setup...

  • Page 22: Chapter 4 Pc Configuration

    The Gateway must be set to the IP address of the Internet Gateway. • The DNS should be set to the address provided by your ISP. If your LAN has a Router, the LAN Administrator must re- configure the Router itself. Refer to Chapter 8 - Ad- vanced Setup for details.
  • Page 23 PC Configuration Checking TCP/IP Settings - Windows 9x/ME: 1. Select Control Panel - Network. You should see a screen like the following: Figure 9: Network Configuration 2. Select the TCP/IP protocol for your network card. 3. Click on the Properties button. You should then see a screen like the following. Figure 10: IP Address (Win 95) Ensure your TCP/IP settings are correct, as follows: Using DHCP...
  • Page 24 Internet Gateway User Guide • On the Gateway tab, enter the Internet Gateway’s IP address in the New Gateway field and click Add, as shown below. Your LAN administrator can advise you of the IP Address they assigned to the Internet Gateway. Figure 11: Gateway Tab (Win 95/98) •...
  • Page 25 PC Configuration Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as shown below. Figure 13: Windows NT4.0 - TCP/IP 2. Click the Properties button to see a screen like the one below.
  • Page 26 Internet Gateway User Guide Figure 14: Windows NT4.0 - IP Address 3. Select the network card for your LAN. 4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address, as explained below. Obtain an IP address from a DHCP Server This is the default Windows setting.
  • Page 27 Figure 15 - Windows NT4.0 - Add Gateway 2. The DNS should be set to the address provided by your ISP, as follows: • Click the DNS tab. • On the DNS screen, shown below, click the Add button (under DNS Service Search Order), and enter the DNS provided by your ISP.
  • Page 28 Internet Gateway User Guide Figure 16: Windows NT4.0 - DNS...
  • Page 29 PC Configuration Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Network and Dial-up Connection. 2. Right - click the Local Area Connection icon and select Properties. You should see a screen like the following: Figure 17: Network Configuration (Win 2000) 3.
  • Page 30 Internet Gateway User Guide Figure 18: TCP/IP Properties (Win 2000) 5. Ensure your TCP/IP settings are correct, as described below. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the Internet Gateway will act as a DHCP Server.
  • Page 31 PC Configuration Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Network Connection. 2. Right click the Local Area Connection and choose Properties. You should see a screen like the following: Figure 19: Network Configuration (Windows XP) 3. Select the TCP/IP protocol for your network card. 4.
  • Page 32 Internet Gateway User Guide Figure 20: TCP/IP Properties (Windows XP) 5. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the Internet Gateway will act as a DHCP Server.

  • Page 33: Internet Access

    Internet Access To configure your PCs to use the Internet Gateway for Internet access: • Ensure that the DSL modem, Cable modem, or other permanent connection is functional. • Use the following procedure to configure your Browser to access the Internet via the LAN, rather than by a Dial-up connection.

  • Page 34: Macintosh Clients

    4. Close the TCP/IP panel, saving your settings. Note: If using manually assigned IP addresses instead of DHCP, the required changes are: • Set the Router Address field to the Internet Gateway’s IP Address. • Ensure your DNS settings are correct. Linux Clients To access the Internet via the Internet Gateway, it is only necessary to set the Internet Gateway as the "Gateway".

  • Page 35: Chapter 5 Operation And Status

    Chapter 5 Operation and Status This Chapter details the operation of the Internet Gateway and the status screens. Operation Once both the Internet Gateway and the PCs are configured, operation is automatic. However, there are some situations where additional Internet configuration may be required: •...
  • Page 36 Internet Gateway User Guide Figure 21: Status Screen Data - Status Screen Internet Connection Method This indicates the current connection method, as set in the Setup Wizard. This shows the connection status of the modem. Broadband Modem Internet Connection Current connection status: •...

  • Page 37: Connection Status - Pppoe

    IP addresses allocated to them, use the PC Database option on the Advanced menu. System Device Name This displays the current name of the Internet Gateway. The current version of the firmware installed in the Internet Firmware Version Gateway. Buttons Connection Details View the details of the current Internet connection.
  • Page 38 Internet Gateway User Guide Data - PPPoE Screen Connection Physical Address The hardware address of this device, as seen by remote devices on the Internet. (This is different to the hardware address seen by devices on the local LAN.) IP Address The IP Address of this device, as seen by Internet users.
  • Page 39 Idle time-out reached The connection has been idle for the time period specified in the "Idle Time-out" field. The connection will now be termi- nated. Disconnecting The current connection is being terminated, due to either the "Idle Time-out" above, or "Disconnect" button being clicked. Error: Remote Server not ISP's Server did not respond.

  • Page 40: Connection Status - Pptp

    Internet Gateway User Guide Connection Status - PPTP If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will be displayed when the "Connection Details" button is clicked. Figure 23: PPTP Status Screen Data - PPTP Screen Connection Physical Address The hardware address of this device, as seen by remote devices on the Internet.

  • Page 41: Connection Status - Telstra Big Pond

    Delete all data currently in the Log. This will make it easier to read Clear Log new messages. Refresh Update the data on screen. Connection Status - Telstra Big Pond An example screen is shown below. Figure 24: Telstra Big Pond Status Screen Data - Big Pond Screen Connection The hardware address of this device, as seen by remote devices.

  • Page 42: Connection Details - Singtel Ras

    Internet Gateway User Guide Connection Log • The Connection Log shows status messages relating to the Connection Log existing connection. • The Clear Log button will restart the Log, while the Refresh button will update the messages shown on screen. Buttons If not connected, establish a connection to Telstra Big Pond.

  • Page 43: Connection Details - Fixed/Dynamic Ip Address

    The IP Address of the remote Gateway or Router associated with the Default Gateway IP Address above. DNS IP Address The IP Address of the Domain Name Server which is currently used. DHCP Client This will show "Enabled" or "Disabled", depending on whether or not this device is functioning as a DHCP client.
  • Page 44 ISP (Internet Service Provider). Network Mask The Network Mask associated with the IP Address above. The IP Address of the remote Internet Gateway or Router associated Default Gateway with the IP Address above. DNS IP Address The IP Address of the Domain Name Server which is currently used.

  • Page 45: Chapter 6 Advanced Features

    Chapter 6 Advanced Features This Chapter explains when and how to use the Internet Gateway’s "Ad- vanced" Features. Overview The following advanced features are provided. • Blocked Packet • Dynamic DNS • Advanced Internet • Communication Applications • Special Applications •...
  • Page 46 Internet Gateway User Guide Blocked Packet Screen To view this screen, select the Blocked Packet link on the Advanced menu. Figure 27: Blocked Packet Screen Data - Blocked Packet Screen Group Group Select the desired Group. The screen will update to display the settings for the selected Group.
  • Page 47 Internet Access Restrictions Select the desired options for the current group: • None - Nothing is blocked. Use this to create the least restric- tive group. • Block all Internet access - All traffic via the WAN port is blocked. Use this to create the most restrictive group. •...

  • Page 48: Group Members Screen

    Internet Gateway User Guide Group Members Screen This screen is displayed when the Members button on the Blocked Packet screen is clicked. Figure 28: Group Members Use this screen to add or remove members (PCs) from the current group. • The "Del >>"...

  • Page 49: Default Schedule Screen

    Default Schedule Screen This screen is displayed when the Define Schedule button on the Blocked Packet screen is clicked. • This schedule can be (optionally) applied to any Blocked Packet Group. • Blocking will be performed during the scheduled time (between the "Start" and "Finish" times.) •...

  • Page 50: Services Screen

    Internet Gateway User Guide Services Screen This screen is displayed when the Edit Service List button on the Blocked Packet screen is clicked. Figure 30: Blocked Packet - Services Data - Services Screen Available Services Available Services This lists all the available services. "Delete"...
  • Page 51 Clear the "Add New Service" area, ready for entering data for a new Cancel Service. Blocked Packet Log To check the operation of the Blocked Packet feature, a Blocked Packet Log is provided. Click the View Log button on the Blocked Packet screen to view this log. This log shows attempted Internet accesses which have been blocked by the Blocked Packet function.

  • Page 52: Dynamic Dns

    Internet Gateway User Guide Dynamic DNS This free service is very useful when combined with the Virtual Server feature. It allows Internet users to connect to your Virtual Servers using a URL, rather than an IP Address. This also solves the problem of having a dynamic IP address. With a dynamic IP address, your IP address may change whenever you connect, which makes it difficult to connect to you.
  • Page 53 • Details of your DDNS account (Name, password, Domain name) must then be entered and saved on this screen. • This device will then automatically ensure that your current IP Address is recorded by the DDNS Service Provider. (You do NOT need to use the "Client"...

  • Page 54: Advanced Internet Screen

    Internet Gateway User Guide Advanced Internet Screen This screen allows configuration of all advanced features relating to Internet access. • Communication Applications • Special Applications • Multi-DMZ • URL filter An example screen is shown below. Figure 32: Internet Screen Communication Applications Most applications are supported transparently by the Internet Gateway.

  • Page 55: Special Applications

    Communication Applications Select an Application This lists applications which may generate incoming connections, where the destination PC (on your local LAN) is unknown. Send incoming calls to This lists the PCs on your LAN. • If necessary, you can add PCs manually, using the "PC Database"...

  • Page 56: Using A Special Application

    Internet Gateway User Guide Data - Special Applications Screen Checkbox Use this to “Enable” or “Disable this Special Application,” as required. Name Enter a descriptive name to identify this Special Application. • Type - Select the protocol (TCP or UDP) used when you receive data Incoming from the special application or service.

  • Page 57: Url Filter

    The "DMZ PC" is effectively outside the Firewall, mak- ing it more vulnerable to attacks. For this reason, you should only enable the DMZ feature when required. URL Filter The URL Filter allows you to block access to undesirable • To use this feature, you must define "filter strings".

  • Page 58: Virtual Servers

    Internet Gateway User Guide Buttons Delete/Delete All Use these buttons to delete the selected entry or all entries, as required. Multiple entries can be selected by holding down the CTRL key while selecting.(On the Macintosh, hold the SHIFT key while selecting.) Use this to add the current Filter String to the site list.

  • Page 59: Virtual Servers Screen

    Virtual Servers Screen The Virtual Servers screen is reached by the Virtual Servers link on the Advanced screen. An example screen is shown below. Figure 36: Virtual Servers Screen This screen lists a number of pre-defined Servers, and allows you to define your own Servers. Details of the selected Server are shown in the "Properties"...

  • Page 60: Defining Your Own Virtual Servers

    Internet Gateway User Guide The port number used by Internet users when connecting to the External Port No. Server. This is normally the same as the Internal Port Number. If it is different, this device will perform a "mapping" or "translation" function, allowing the server to use one port address, while clients use a different port address.

  • Page 61: Connecting To The Virtual Servers

    From the Internet, ALL Virtual Servers have the IP Address allocated by your ISP. Connecting to the Virtual Servers Once configured, anyone on the Internet can connect to your Virtual Servers. They must use the Internet IP Address (the IP Address allocated to you by your ISP). e.g., http://203.70.212.52 ftp://203.70.212.52...

  • Page 62: Wan Port Configuration

    Internet Gateway User Guide WAN Port Configuration The WAN Port option is on the Advanced menu. Figure 37: WAN Port Screen Data – WAN Port Screen Identification Normally, there is no need to change the default name, but if your Hostname ISP requests that you use a particular Hostname, enter it here.
  • Page 63 Big Pond Cable - for Australia only. • SingTel RAS - for Singapore only. Login User Name The User Name (or account name) provided by your ISP. Address (Not required for PPPoE) router or gateway, as supplied by your Advanced Features Wire- ISP.
  • Page 64 Internet Gateway User Guide Enter the password for the login name above. Login Password RAS Plan For SingTel customers only, select the RAS plan you are on. Server Address This is not required for PPPoE or SingTel RAS. For PPTP, L2TP and BPA, enter the Server address as provided by your ISP.

  • Page 65: Chapter 7 Advanced Administration

    Chapter 7 Advanced Administration This Chapter explains the settings available via the "Administration" section of the menu. Overview Normally, it is not necessary to use these screens, or change any settings. These screens and settings are provided to deal with non-standard situations, or to provide additional options for advanced users.

  • Page 66: Config File

    Internet Gateway User Guide Config File This feature allows you to download the current settings from the Internet Gateway, and save them to a file on your PC. You can restore a previously-downloaded configuration file to the Internet Gateway, by uploading it to the Internet Gateway.

  • Page 67: Logs

    Logs The Logs record various types of activity on the Internet Gateway. This data is useful for troubleshooting, but enabling all logs will generate a large amount of data and adversely affect performance. Since only a limited amount of log data can be stored in the Internet Gateway, log data also can be E-mailed to your PC.
  • Page 68 Internet Gateway User Guide E-Mail Reports Send E-mail alert If enabled, an E-mail will be sent immediately if a DoS (Denial of Service) attack is detected. If enabled, the E-mail address infor- mation must be provided. You can choose to have the logs E-mailed to you, by enabling E-mail Logs either or both checkboxes.

  • Page 69: Network Diag

    Network Diagnostics This screen allows you to perform a "Ping" or a DNS lookup. These activities can be useful in solving network problems. An example Network Diagnostics screen is shown below. Figure 40: Network Diagnostics Screen Data - Network Diagnostics Screen Ping Ping this Enter the IP address you wish to ping.

  • Page 70: Options

    Internet Gateway User Guide Options This screen allows advanced users to enter or change a number of settings. For normal opera- tion, there is no need to use this screen or change any settings. An example Options screen is shown below. Figure 41: Options Screen Data - Options Screen Backup DNS...
  • Page 71 • If checked, then UPnP users can disable Internet access via this Allow Internet device. access to be • If Disabled, UPnP users disabled device. But currently, this restriction only applies to users running Windows XP, who access the Properties via UPnP. (e.g., Right - click the Internet Gateway in My Network Places, and select Prop- erties) MTU (Maximum Transmission Unit) value should only be changed if...

  • Page 72: Pc Database

    Internet Gateway User Guide PC Database The PC Database is used whenever you need to select a PC (e.g., for the "DMZ" PC). It eliminates the need to enter IP addresses. Also, you do not need to use fixed IP addresses on your LAN.
  • Page 73 Data - PC Database Screen This lists all current entries. Data displayed is name (IP Address) type. Known PCs The "type" indicates whether the PC is connected to the LAN. Name If adding a new PC to the list, enter its name here. It is best if this matches the PC's "hostname."...
  • Page 74 Internet Gateway User Guide PC Database (Admin) This screen is displayed if the "Advanced Administration" button on the PC Database is clicked. It provides more control than the standard PC Database screen. Figure 43: PC Database (Admin) Data - PC Database ( Admin) Screen This lists all current entries.
  • Page 75 Select the appropriate option: IP Address • Automatic - The PC is set to be a DHCP client (Windows: "Ob- tain an IP address automatically"). The Internet Gateway will allocate an IP address to this PC when requested to do so. The IP address could change, but normally won't.

  • Page 76: Remote Admin

    Internet Gateway User Guide Remote Admin If enabled, this feature allows you to manage the Internet Gateway via the Internet. Figure 44: Remote Administration Screen Data - Remote Administration Screen Remote Administration Enable Remote Enable to allow management via the Internet. If Disabled, this device Management will ignore management connection attempts from the Internet.

  • Page 77: Routing

    "Routing" page, even if your LAN has other Routers. • If your LAN has a standard Router (e.g.. Cisco) on your LAN, and the Internet Gateway is to act as a Gateway for all LAN segments, enable RIP (Routing Information Protocol) and ignore the Static Routing table.
  • Page 78 • Gateway IP Address - The IP Address of the Gateway or Router which the Internet Gateway must use to communicate with the destination above. (NOT the router attached to the re- mote segment). • Metric - The number of "hops" (routers) to pass through to reach the remote LAN segment.

  • Page 79: Configuring Other Routers On Your Lan

    It is essential that all IP packets for devices not on the local LAN be passed to the Internet Gateway, so that they can be forwarded to the external LAN, WAN, or Internet. To achieve this, the local LAN must be configured to use the Internet Gateway as the Default Router or Default Gateway.
  • Page 80 Gateway IP Address Metric Entry 2 (Segment 2) Destination IP Address Network Mask Gateway IP Address Metric For Router A's Default Route Destination IP Address Network Mask Gateway IP Address For Router B's Default Route Destination IP Address Network Mask Gateway IP Address 192.168.1.0...

  • Page 81: Security

    Security This screen allows you to set Firewall and other security-related options. Figure 47: Security Screen Data - Security Screen Firewall If enabled, DoS (Denial of Service) attacks will be detected and Enable DoS blocked. The default is enabled. It is strongly recommended that this Firewall setting be left enabled.
  • Page 82 Internet Gateway User Guide Options The ICMP protocol is used by the "ping" and "traceroute" programs, Respond to and by network monitoring and diagnostic programs. ICMP • If checked, the Internet Gateway will respond to ICMP packets received from the Internet. •...

  • Page 83: Upgrade Firmware

    Upgrade Firmware The firmware (software) in the Internet Gateway can be upgraded using your Web Browser. You must first download the upgrade file, then select Upgrade on the Administration menu. You will see a screen like the following. Figure 48: Upgrade Firmware Screen To perform the Firmware Upgrade: 1.

  • Page 84: Appendix A Troubleshooting

    Appendix A Troubleshooting This Appendix covers the most likely problems and their solutions. Overview This chapter covers some common problems that may be encountered while using the Internet Gateway and some possible solutions to them. If you follow the suggested steps and the Internet Gateway still does not function properly, contact your dealer for further advice.
  • Page 85 Problem 2: Some applications do not run properly when using the Internet Gate- way. The Internet Gateway processes the data passing through it, so it is not Solution 2: transparent. Use the Special Applications feature to allow the use of Internet applications which do not function correctly.

  • Page 86: Appendix B Specifications

    Appendix B Specifications Multi-Function Internet Gateway Model 47611-6T4 Dimensions 140mm(W) * 99mm(D) * 27mm(H) Operating Temperature 0° C to 40° C Storage Temperature -10° C to 70° C Network Protocol: TCP/IP Network Interface: 5 Ethernet: 4 * 10/100BaseT (RJ45) LAN connection 1 * 10/100BaseT (RJ45) for WAN LEDs Power Adapter...

  • Page 87: Regulatory Approvals

    Regulatory Approvals CE Standards This product complies with the 99/5/EEC directives, including the following safety and EMC standards: • EN301489-1/-17 • EN60950 CE Marking Warning This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Table of Contents