Customizing The Trends Key; Calculations; Cardiac Calculations - GE Dash 3000 Operator's Manual

Patient Data

Customizing the Trends Key

Calculations

Cardiac Calculations

6-8
The LAB DATA information window displays all the available lab data for the patient
in the LIS database. How information is display in the window varies by report type.
Use the following options to review LAB DATA reports.
Option
VIEW OLDER
VIEW NEWER
PAGE DOWN
PAGE UP
VIEW RANGES AND
UNITS OF MEASURE
NOTE
Only available in software version 6 or later.
To select the default trend type, select MORE MENUS > MONITOR SETUP >
MONITOR DEFAULTS > SETUP DEFAULT DISPLAY > TRENDS HARDKEY
and select one of the following options:
TABULAR ALL — Displays the VITAL SIGNS information window sorted by
parameter priority. This is the factory default setting.
TABULAR NBP — Displays the VITAL SIGNS window sorted by NBP.
GRAPHIC — Displays the GRAPHIC TRENDS information window.
CRG — Displays the CRG TRENDS information window.
NOTE
Only available in the CARDIO-PULMONARY software package.
The cardiac calculations program displays monitored and calculated hemodynamic
parameter values that are used in cardiac output measurement.
The calculated parameter values are computed with input values. The input values are
obtained from available monitored patient data. The patient's height and weight are
required to compute cardiac calculations.
For more information on calculation parameters and formulas, refer to the GE
"Critical Care Monitoring Clinical Reference and Troubleshooting Guide".
Dash™ 3000/4000/5000
Function
View the previous report
View the next report.
View the previous page of reports.
View the next page of reports.
View the high and low ranges and the units of measure used
in the selected report.
2000966-386D