GE Dash 3000 Operator's Manual page 253

Gas Interface
Pulse Oximeter Interface
Transcutaneous pO
Ventilator Interface
Continuous Cardiac Output
IV Pump
2000966-386D
For more information, refer to
When a gas interface is connected, the following applies:
The monitor displays CO
The information displayed varies by device.
For more information, refer to
When a pulse oximeter interface is connected, the following applies:
The monitor displays an SpO
The information displayed varies by device.
For more information, refer to
/pCO Interface
2 2
When a transcutaneous pO
The monitor displays a TC parameter window.
The information displayed varies by device.
When a ventilator interface is connected, the following applies:
The monitor displays a VENT parameter window.
The monitor displays up to four ventilator parameters.
The information displayed varies by device.
The control settings vary by device.
When a cardiac output interface is connected, the following applies:
The monitor displays a CCO parameter window.
The monitor may display an additional SvO
The information displayed varies by device.
For more information, refer to
When an IV pump interface is connected, the following applies:
The monitor does not display a parameter window for IV pumps.
The monitor does not broadcast alarms.
Dash™ 3000/4000/5000
Chapter 15 and Chapter
and GAS parameter windows.
2
Chapter 15.
parameter window.
2
Chapter 11.
/pCO interface is connected, the following applies:
2 2
parameter window.
2
Chapter 12.
Interfacing with Non-GE Devices
16.
E-17