GE Dash 3000 Operator's Manual page 143

Ohmeda and Masimo
Nellcor
2000966-386D
Option
RATE VOL
SPO2 LIMITS
SPEED
The following settings control pulse oximetry monitoring for the Ohmeda and
Masimo configuration options.
Option
PERSISTENT
The following settings control pulse oximetry monitoring for the Nellcor
configuration option.
Dash™ 3000/4000/5000
Function
Select the volume of the pulse rate tone to sound when an
SpO pulse is detected. This is a variable pitch tone. The
2
tone pitch decreases as the patient's saturation level
decreases. The lower the setting, the quieter the tone.
NOTE
Turning the pulse tone volume off also automatically
turns off the ECG QRS volume.
Select the high and low alarm limits for SpO
and pulse rate (beats per minute). An alarm sounds when a
value occurs outside of these limits.
Select a sweep speed for the displayed waveform.
Function
Turn the feature on or off. When on, a "PROBE IS OFF THE
PATIENT" system status WARNING displays in the SpO
parameter window when the patient cable is disconnected.
The parameter window and waveform still display.
Monitoring SpO2
percentage
2
2
11-9