GE Dash 3000 Operator's Manual page 43

Button
Cardiac Output Adult and Operating Room
CRG Events Neonatal
CRG Print Neonatal
CRG Recall Neonatal
Defaults Adult, Neonatal and Operating Room
Display On/Off Adult, Neonatal and Operating Room
Dose Calcs Neonatal
Graph Go/Stop Print Adult, Neonatal and Operating Room
Graphic Trends Adult and Operating Room
Main Menu Adult, Neonatal and Operating Room
NBP Auto Adult and Operating Room
NBP Go/Stop Adult, Neonatal and Operating Room
NBP Stat Adult and Operating Room
New Case Operating Room
PA Wedge Adult and Operating Room
QRS Volume Neonatal
Resp Relearn Neonatal
Silence Alarm Adult, Neonatal and Operating Room
SpO2 Operating Room
View Other Adult and Neonatal
Vital Signs Adult and Neonatal
Zero All Adult, Neonatal and Operating Room
Dash Port 2
Remote Display
2000966-386D
Version
Opens the CARDIAC OUTPUT menu.
Opens the DOCUMENT CRG EVENTS window.
Prints the CRG waveforms.
Opens the CRG TRENDS menu at the most recent CRG event.
Opens the MONITOR DEFAULTS menu.
Turns the display, alarms and NBP off, but remaining on AC or
battery power and active at the central station.
Opens the DOSE CALCS menu.
Prints the current patient data. Press again to stop.
Opens the GRAPHICS TRENDS menu.
Returns to the main display.
Opens the NBP AUTO menu.
Begins an NBP measurement. Press again to stop.
Starts five minutes of continuous, sequential NBP measurements.
Discharges and admits a patient.
Opens the PA WEDGE menu.
Opens a menu to adjust the QRS volume tone.
Relearns the patient's respiration.
Silences sounding alarms.
Opens the SPO
Opens the VIEW OTHER PATIENTS menu.
Opens the VITAL SIGNS menu.
Zeroes all invasive pressure lines open to the atmosphere.
The Dash Port 2 is a docking station for a monitor. It gives the monitor easy connect/
disconnect access to AC power, the network, remote display and auxiliary devices.
For more information, refer to the docking station operating instructions.
The remote display provides a larger display or display in a separate room. The
remote display must be located within 150 feet of the patient monitor. It also requires
a docking station, a monitor running software version 5 or later and a network
connection.
Dash™ 3000/4000/5000
Function
menu.
2
Equipment Overview
2-11