Emc Environmental Conditions For Products Installed In The European Union; Hazardous Locations Standards - Cisco Catalyst IE9300 Hardware Installation Manual

EMC Environmental Conditions for Products Installed in the European Union

EMC Environmental Conditions for Products Installed in the
European Union
This section applies to products to be installed in the European Union.
The equipment is intended to operate under the following environmental conditions with respect to EMC:
• A separate defined location under the user's control.
• Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT K27.
• AC-power distribution shall be one of the following types, where applicable: TN-S and TN-C as defined
In addition, if equipment is operated in a domestic environment, interference could occur.

Hazardous Locations Standards

The following table lists the standards that are used for hazardous locations approval and certification in
English and French.
Table 18: Standards for Hazardous Locations
The following standards were used for the
hazardous locations approvals and certifications:
UL 121201, Ed. 9
CAN/CSA C22.2 No. 60079-0:19, 4th Edition,
February 2019
CAN/CSA C22.2 No. 60079-7:16
CSA C22.2 No. 213-Ed. 3
EN IEC 60079-0:2018
EN 60079-7: 2015+A1:2018
UL 60079-0 7th Edition, 2019-03-26
UL 60079-7, 5th Edition, 2017-02-24
UL 60079-15 5th Edition, 2020-04-07
CAN/CSA-C22.2 No 60079-15:18, November 2018
EN IEC 60079-15: 2019
The following table lists the hazardous location strings in English and French.
Cisco Catalyst IE9300 Rugged Series Switch Hardware Installation Guide
76
in IEC 364-3.
Hazardous Location Installation Information
Les normes suivantes ont été appliquées pour les
approbations et les certifications dans le cadre
d'environnements dangereux:
UL 121201, Éd. 9
CAN/CSA C22.2 No. 60079-0:19, 4e éd., fevrier 2019
AN/CSA C22.2 No. 60079-7:16
A C22.2 No. 213-Éd. 3
EN IEC 60079-0:2018
EN 60079-7: 2015+A1:2018
UL 60079-0, 7e éd., 2019-03-26
UL 60079-7, 5e éd., 2017-02-24
UL 60079-15, 5e éd., 2020-04-07
CAN/CSA-C22.2 No 60079-15:18, novembre 2018
EN IEC 60079-15: 2019