Sfp Installation - Cisco Catalyst IE9300 Hardware Installation Manual

Switch Installation
Install the switch, following the orientation in the following illustration:
Figure 17: Wall-mounting the Switch
What to do next
Complete the following tasks:
• Wire the switch to a power source. See
• Connect the switch ports. See the section

SFP Installation

This section presents procedures to install and remove fiber-optic and 1000BASE-T SFP transceiver modules.
Wire the Power
Connecting Devices to the Ethernet
Cisco Catalyst IE9300 Rugged Series Switch Hardware Installation Guide
Source.
Ports.
SFP Installation
29