Industry Canada Class A Emission Compliance Statement; Australia And New Zealand Class A Statement; United Kingdom Telecommunications Safety Requirement; European Union Emc Directive Conformance Statement - Cisco InfiniBand 4x User Manual

Cisco systems switch module for ibm bladecenter user guide

Table of Contents

Notices

Industry Canada Class A emission compliance statement

This Class A digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d'Industrie Canada

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Attention: This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Notice to Customers

This apparatus is approved under approval number NS/G/1234/J/100003 for indirect connection to

public telecommunication systems in the United Kingdom.

This product is in conformity with the protection requirements of EU Council Directive 89/336/EEC on

the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM

cannot accept responsibility for any failure to satisfy the protection requirements resulting from a

nonrecommended modification of the product, including the fitting of non-IBM option cards.

This product has been tested and found to comply with the limits for Class A Information Technology

Equipment according to CISPR 22/European Standard EN 55022. The limits for Class A equipment were

derived for commercial and industrial environments to provide reasonable protection against

interference with licensed communication equipment.

Attention:

interference in which case the user may be required to take adequate measures.

78-17838-01

This is a Class A product. In a domestic environment this product may cause radio

Cisco 4x InfiniBand Switch Module for IBM BladeCenter User Guide

Electronic Emission Notices

xxxiii

Table of Contents