Installing Windows 2000 - Lenovo ThinkPad R60 9457 Supplementary Manual

http://support.microsoft.com/, type the number of the fix module you need
in the search field, and click the Search button.
Note: The Web site address might change without notice. If the homepage is
To install a fix module, run the .exe file in a subfolder and follow the
instructions on the screen.
Note: If you remove the hard disk drive from the computer with a single-core

Installing Windows 2000

If you are installing Windows 2000 on a computer with a dual-core processor,
disable Core Multi-Processing before starting the installation as follows:
1. Start the BIOS Setup Utility.
2. Select Config. The Config submenu opens.
3. Select CPU. The CPU submenu opens.
4. For Core Multi-Processing, select Disabled.
5. Press F10.
If you install Windows 2000 and its software on your computer from the drive
on the ThinkPad Advanced Dock, install Windows 2000 integrated with
Service Pack 4. For details, refer to the Microsoft web site
at:http://www.microsoft.com/windows2000/downloads/servicepacks/sp4/
spdeploy.htm#scenario_1_installing_windows_2000_integrated_with_the_
service_pack_rpmd
To install Windows 2000 and its related software on your computer, do as
follows:
Before installing the operating system, install Intel Matrix Storage Manager
Driver, as follows:
Note
Be sure to install Intel Matrix Storage Manager Driver before installing
the operating system. Otherwise your computer will not respond; it will
only display a blue screen.
not displayed, search for it from the Microsoft top page.
processor and install it on a computer with a dual-core processor, you
can get access to the hard disk drive. The opposite, however, is not
true: If you remove the hard disk drive from a computer with a
dual-core processor and install it on a computer with a single-core
processor, you cannot get access to the hard disk drive.
Installing a new operating system
Chapter 5. Installing a new operating system
33