Lenovo ThinkPad R60 9457 Supplementary Manual page 29

v If you are using the ac adapter, or using the battery, and the battery
status indicator is on (is green), press Fn+Home to make the screen
brighter.
v If the standby status indicator is on (is green), press Fn to resume from
the standby mode.
v If you still have the problem, do the Solution in the problem below.
Problem:
The screen is unreadable or distorted.
Solution:
Make sure that:
v The display device driver is installed correctly.
v The screen resolution and color quality are correctly set.
v The monitor type is correct.
To check these settings, do as follows:
1. Right-click on the desktop, click Properties, then click the Settings tab.
2. Check whether the screen resolution and color quality are correctly set.
3. Click Advanced.
4. Click the Adapter tab.
5. Make sure "Mobile Intel(R) 945GM Express Chipset Family", "ATI
Mobility Radeon X1300", or "ATI Mobility Radeon X1400" is shown in
the adapter information window.
6. Click the Properties button. Check the "Device status" box and make
sure the device is working properly. If not, click the Troubleshooter
button.
7. Click the Monitor tab.
8. Make sure the information is correct.
9. Click the Properties button. Check the "Device status" box and make
sure the device is working properly. If not, click the Troubleshooter
button.
Problem:
The screen stays on even after you turn off your computer.
Solution:
Press and hold the power switch for 4 seconds or more to turn off your
computer; then turn it on again.
Problem:
Missing, discolored, or bright dots appear on the screen every time you
turn on your computer.
Solution:
This is an intrinsic characteristic of the TFT technology. Your computer's
display contains multiple thin-film transistors (TFTs). A small number of
missing, discolored, or bright dots on the screen might exist all the time.
Solving computer problems
Chapter 3. Solving computer problems
21