Dst (Daylight Saving Time) Setting; Language Selection - La Crosse Technology WS-8011UM-TWC Instruction Manual

C) DST (DAYLIGHT SAVING TIME) SETTING
Note: The DST default is "On", meaning that the WWVB will automatically
change the time according to Daylight Saving Time in the spring and fall. For
areas that do not recognize DST changes (Arizona, Hawaii and parts of
Indiana) turn the DST "OFF".
1) Hold down the "SET" button for 2 seconds (the selected time zone will
flash).
2) Press and release the "SET" button once more until "On" flashes in the time
LCD and "DST" flashes where the Weekday normally appears.
3) Press and release the "+" button to turn the DST off, as will be indicated by
the display of "OFF" in the time LCD.
4) Press and release the "SET" button to confirm the DST setting, and to
advance to select the language for the weekday.
D) LANGUAGE SELECTION FOR THE WEEKDAY
1) Hold down the "SET" button for 2 seconds (the selected time zone will
flash).
2) Press and release the "SET" button 2 times until the default language "US"
flashes in the time LCD.
3) Press and release the "+" button to toggle through and to select the desired
language. There are 3 languages to select from:
US English
F French
E Spanish
4) Press and release the "SET" button to confirm the language setting, and to
advance to manually set the time.
E) TIME SETTING
Note: When the WWVB signal is found, that time will over-ride the manually set
time.
1) Hold down the "SET" button for 2 seconds (the selected time zone will
flash).
2) Press and release the "SET" button 3 times until the hour "12" flashes in
the time LCD.
3) Press and release the "+" button to select the hour.
Note: when setting the hour, "PM" will appear to the left of the hour display, if
it is AM nothing will be displayed.
7