Your clock will automatically set up with Eastern Time Zone, Daylight Saving Time On,
English for the language, 12 hour clock (AM/PM) and °F for temperature.
I)
FUNCTION BUTTONS
There are 4 function buttons located on the backside of the Moon Phase Clock. The
function buttons are labeled: "SET", "+", "ALM" and "SNZ".
II) TIME ZONE SETTING
1) Hold down the "SET" button for 2 seconds, the default setting "-5EST" will
flash in the Date LCD.
2) Press and release the "+" button to select your desired time zone. There are
13 time zones to choose from:
-5EST
-6CST
-7MST
-8PST
-9ALA
-10HAW
-11
-12
GMT
-1
-2
-3
-4ATL
3) Press and release the "SET" button to confirm the time zone setting and to
advance to the DST (Daylight saving time) setting.
III) DST (DAYLIGHT SAVING TIME) SETTING
Note: The DST default (factory) setting is "On", meaning that the WWVB will
automatically change the time according to Daylight Saving Time in the spring and
fall. For areas that do not recognize DST changes (Arizona and parts of Indiana)
turn the DST "OFF".
1)
"On" will be flashing in the time LCD and "DST" flashes where the
Weekday normally appears.
2) Press and release the "+" button to turn the DST off, as will be indicated by
the display of "OFF" in the time LCD.
3) Press and release the "SET" button to confirm the DST setting and to
advance to select the language for the weekday.
Eastern Time (default setting)
Central Time
Mountain Time
Pacific Time
Alaskan Time
Hawaiian Time
Greenwich Mean Time
Atlantic Time
5