La Crosse Technology WS-8008U-IT - Atomic Digital Wall Clock Manual

Lets Get Started

1. Insert 2 AA batteries into your clock.
   
2. Configure basic settings.

The clock will look for the Atomic time signal for 7 minutes when batteries are first installed. Buttons will not function during the Atomic time signal search.

Options:

• Press the WWVB SEARCH button once to stop the Atomic time signal search.
• Manually set the time, date, and time zone.
• The clock will search for the Atomic time signal again after midnight.
• Press WWVB SEARCH button anytime, to start an Atomic signal search.
• For information about WWVB visit: http://bit.ly/AtomicTime

Buttons

Basic Settings

• Hold the SET button to enter time set mode.
• Press the ARROW buttons to adjust values.
• Press SET to confirm adjustments and move to next item.

Settings order:

1. 12/24 Hour Format
   
2. Hour
   
3. Minutes
   
4. Year
   
5. Month
   
6. Date
   
7. Daylight Saving Indicator (ON to automatically change)
   

Press SET to exit, or wait 30 seconds without pressing buttons to return to the normal time display.

Time Zone

• This clock has four time zones to choose from.
• The default time zone is Pacific (P)
• Press the ZONE button to select your time zone.
  
  • P = Pacific
  • M = Mountain
  • C = Central
  • E = Eastern

Fahrenheit or Celsius

• Press the ºF/ºC button to switch from Fahrenheit to Celsius temperature display.
  

Alarm Time

1. Hold the ALARM button for 3 seconds until the seconds are replaced by the letters "AL".
2. The alarm hour will flash.
3. Use the ARROW buttons to set the hour.
4. Press the ALARM button once. The alarm minutes will flash.
5. Use the ARROW buttons the set the minutes.
   
6. Press the ALARM button to confirm and exit.

Activate/Deactivate Alarm

Setting the alarm time and activating the alarm are separate steps.

1. Press the ALARM button to activate the alarm.
2. Press the ALARM button again to deactivate the alarm.
3. The alarm icon (bell) will appear when active.
   
4. The alarm icon (bell) will disappear when inactive.

Snooze

• Press SNOOZE to silence an active alarm for 5 minutes.
• The alarm icon will flash.
• This is a crescendo alarm that will sound for 120 seconds unless deactivated.
• Press any button to stop the alarm for 24 hours.

Reset Button

• If the atomic clock display appears distorted or is not responding to buttons, use a pen or paper clip to press RESET one time.
• This will reset the atomic clock to default settings.

Help Us, Help You

If you have ideas for features or support solutions you'd like to see us make, please let us know! We truly want to make owning a La Crosse Technology product not only a practical experience, but also a fun one.
So email us at: store@lacrossetechnology.com

Let's Get Social

JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!

Care and Maintenance

• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity ( + and - ).
• Remove batteries from equipment when it is not to be used for an extended period of time.
• Promptly remove expired batteries.

Specifications

Warranty and Support

Before returning a product, please contact our friendly customer support or visit our online help:
Phone: 1-608-782-1610
Online: www.lacrossetechnology.com/support

Documents / Resources

References

• Radio Station WWVB | NIST

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download La Crosse Technology WS-8008U-IT - Atomic Digital Wall Clock Manual