Mounting - La Crosse Technology WS-8011UM-TWC Instruction Manual

IV)

MOUNTING

Hanging Holes
Function Buttons
Foldout Table Stands
There are two possible ways to mount the temperature clock:
•
use of the foldout table stands
•
wall mounting
A) FOLDOUT TABLE STANDS
The Foldout table stand legs are located on the
backside, at the lower corners, and on both sides of
the battery cover. The hinges are towards the edges
of the temperature clock and the ends (with no hinge)
need to be folded out towards the edge. Once the
foldout table stands are extended place the
temperature clock in an appropriate location.
B) WALL MOUNTING
1) Using a straightedge, horizontally space at 3-
15/16 of an inch (100.58mm) three screw
positions on a wall.
2) Install three mounting screws (not included) into
a wall within transmission range—leaving
approximately 3/16 of an inch (5mm) extended
from the wall.
3) Place the temperature clock onto the screws, using the hanging holes on the
backside. Gently pull the temperature clock down to lock the screws into
place.
12