Viessmann VITOLIGNO 300-C Installation And Service Instructions Manual page 82

Coding
Coding 1
(continued)
Coding in the factory set condition
Charging
(continued)
Day hopper idle runtime (autom. charging)
2C:...
Screw conveyor delay
2E:...
Discharge cycle - ON
30:...
Discharge cycle - OFF
31:...
Discharge delay
32:...
External charging cycle - ON
40:...
External charging cycle - OFF
41:...
External charging delay
42:...
Reheating suppression buffer tank temperature
33:...
82
Rotary lock valve emptying
time in minutes before
vacuum module starts.
Code is only available for
charging with vacuum
module.
Delay in seconds
Discharge cycle in seconds
(discharge runs for ... sec.)
Discharge pause in seconds
Delay in seconds
External charging cycle in
seconds (external charging
runs for ... sec.)
External charging pause in
seconds
External charging delay in
seconds
Set minimum buffer tank
temperature when being
heated by the solar system
(only available when the
solar system is connected
to the Vitoligno 300-C.
Possible change
2C:... Setting range in min
to
2C:...
2E:0 Setting range in sec.
to
2E:100
30:2 Setting range in sec.
to
30:30
31:... Discharge does not pause: Constant
31:1 Setting range in sec. (discharge pause
to adjustable from 1 to 100 sec.)
31:100
32:0 Setting range in sec.
to
32:100
40:2 Setting range in sec.
to
40:30
41:0 External charging does not pause:
Constant operation
41:1 Setting range in sec.
to (pause in external charging adjustable
41:100 from 1 to 100 sec.)
42:0 Setting range in sec.
to
42:100
33:0 No reheating suppression
Vitoligno 300-C Installation/Service