Flexible Screw Conveyor Final Assembly - Viessmann VITOLIGNO 300-C Installation And Service Instructions Manual

Installation
Vacuum System Final Assembly

Flexible Screw Conveyor Final Assembly

Legend
A Self-tapping screw
54
(continued)
Fitting left and top jacketing panels
1. Fit left side panel.
2. Insert door hinges at the top and bottom left.
The door hinges engage in the retainers.
Close the door.
Note: The hinges are adjustable:
Disengage the damper fittings towards the

front and remove.
Adjust the hinges using the adjusting screws

that are now revealed.
Push the damper fittings back onto the hinge

until they engage.
3. Position top panels, push forwards and secure each
one with 2 self-tapping screws.
Fitting the jacketing panels
Note: Self-tapping screws are included in the delivery.
On step 1:
Secure the front panel from behind with self-tapping
screw.
Vitoligno 300-C Installation/Service