Install The Server Into The Rack - HP ProLiant ML30 Gen10 Plus User Manual

Install the server into the rack

Install the server into the rack
Prerequisites Prerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
Make sure that the PCI fan is installed .
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure Procedure
1. Grasp the tray notch to slide the tray out of the rack.
2. Place the server on the tray.
Verify that the front panel of the server is align with the front of the tray.
Install the server into the rack 50