Connections; Connecting The Usb Cable; Connecting The Network Cable - Kyocera ECOSYS P2135dn Operation Manual

3-2

Connections

This section explains how to start up the printer.

Connecting the USB Cable

Follow the steps as below for connecting the USB cable.
1
Connect the USB cable to the USB Interface Connector.
Note Use a USB cable with a rectangular Type A plug and a
square Type B plug. This cable is sold separately.
2
Connect the other end of the USB cable to the computer's USB
interface connector.

Connecting the Network Cable

Follow the steps as below for connecting the network cable.
1
Remove the cap attached to the printer.
2
Connect the printer to the PC or your network device.
Note Use shielded interface cables. These cables are sold
separately.
Connecting and Printing