Display Assembly - HP g14 Maintenance And Service Manual

Display assembly

NOTE: The display assembly is spared at the subcomponent level only. For more display assembly
spare part information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the Battery (see
a. Service cover (see
b. Hard drive (see
c.
Optical drive (see
d.
Keyboard (see
e.
Top cover (see
f.
Speakers (see
g.
System board (see
h.
Fan (see
Remove the display assembly:
1. Release the display panel cable from the routing clips (1) and channel built into the
base enclosure.
Battery on page
Service cover on page
Hard drive on page
Optical drive on page
Keyboard on page
Top cover on page
Speakers on page
System board on page
Fan on page 60)
29), and then remove the following components:
30)
31)
38)
40)
43)
50)
53)
Component replacement procedures
65