Table of Contents
Advertisement
2 Channel EMG
MOTION
Cardio
Actiwave Electrodes/Subject
Connections
Actiwave User Guide - Issue 2.0.18
EMG 2
[08-536]
MOTION
[08-565]
Cardio
[08-603]
*
Example recording times are based on 128Hz sampling with
8 bit resolution unless otherwise specified
** Three axes acceleration sampled at 32Hz, 10 bit.
*** Three axes acceleration sampled at 32Hz, 8 bit.
The Actiwave recorders (with the exception of the Cardio)
have 1mm male contact pins to mate with 1mm female
sockets attached to the electrode cables. The use of 1mm
pins/sockets helps to reduce the physical size of the
Actiwave in use.
There is a vast range of third party electrodes available to
suit specific applications. Typically third party electrodes
will be fitted with 1.5mm female sockets which are not
directly compatible with the Actiwave. To counter this,
CamNtech offer the following solutions:
Solution
EEG/EMG
electrode pack
450mm
EEG/EMG
electrode pack
Dual channel
recorder with range
and frequency
response optimized
for EMG recording.
Three Axis
accelerometer
providing activity
and body position.
Single channel
recorder for ECG
waveforms with
synchronized three
axis accelerometer
providing activity
and body position.
Catalogue
Ref
Pack of 6 gold plated 'disc'
08-450
electrodes (11mm dia) with
450mm leads and 1mm
connector. Includes Abrasive
skin prep paste, Conductive
Adhesive paste and gauze.
08-100
As above but with 100mm
leads.
24Mb
27 hours
64Mb
6 days,
11
hours**
24Mb
31
hours***
Description
Page 7
Advertisement
Table of Contents
