Running The Software For The First Time - CamNtech The Actiwave User Manual

2.5 Running the
Software for
the first time
Multi/Motion Dock
Actiwave User Guide - Issue 2.0.18
 The drivers will be installed and the computer will then
tell the user that the new hardware is ready to use. If you
change the USB port that the reader is plugged into then
the driver may be automatically re-installed by Windows.
This is an automatic process and the user need take no
action.
The USB drivers must be installed before using the software
.
for the first time
Double clicking on the Actiwave icon on the desktop will
start the software. If a dock is plugged in it should be
detected and a view of it shown on screen. Three types of
interface dock are shown in the figures below:
CardioDock
CombiDock
Page 13