Installing The Actiwave Software; System Requirements; Installing The Software - CamNtech The Actiwave User Manual

2 Installing the Actiwave Software

2.1 System
Requirements
2.2 Installing the
Software
Actiwave User Guide - Issue 2.0.18
The Actiwave software is supplied on a CD ROM
containing all of the components of the software package
including the USB drivers for the Interface Dock. The
following are the minimum requirements of a host PC for
installing the Actiwave software:
 IBM compatible 1000MHz +
 Windows XP, Vista, 7 or 8 operating system
 100 MB hard disk space
 USB port
 A CD-ROM drive or equivalent
 Graphics (1024 x 768 pixels minimum)
In general, a faster processor will provide superior
performance.
Place the CD ROM into the drive; the Actiwave software
installation menu should start automatically as shown
below:
If it does not start automatically (this functionality is
sometimes disabled for security reasons) you will need to
browse with Windows Explorer to view the CD ROM then
double-click on the file 'SplashScreen.exe'.
Follow the installation wizard's onscreen prompts until the
installation is complete. It is recommended that you install
the software in the default location. The operation of this
Page 11