10 Downloading Data; Download Options; Notch Filter; Derived Signals / Annotations - CamNtech The Actiwave User Manual

Table of Contents

Advertisement

10 Downloading data

10.1 Download
options

Notch Filter

Derived Signals / Annotations

Actiwave User Guide - Issue 2.0.18
Select the appropriate channel and then click on the 'Read
Actiwave' button. The following window will appear:
Mains pickup is not usually a problem with the Actiwave
devices. They are connected only to the body and will not
normally pick up signal from mains supplies. However,
any mains pickup that does occur can be removed by
selecting the appropriate filter for your local mains
frequency.
The derived parameters are body position and heart rate.
The body position can only be calculated when there is no
movement and is applied as an annotation in the EDF file.
The heart rate is found using a simple R wave detector. If
you
require
a
more
measurements
then
available that will carry out this work.
sophisticated
algorithm
there
are
specialist
and
programs
Page 28

Advertisement

Table of Contents
loading

Table of Contents