Table of Contents
Advertisement
3 Connecting the Actiwave & Charging the
Battery
3.1
Overview
3.2
Correct
orientation
and position
in the dock
Actiwave User Guide - Issue 2.0.18
Before the Actiwave is used for data collection, the user
must ensure that it is fully charged. A depleted battery may
result in an incomplete recording as the Actiwave may shut
down before data collection is complete. If the battery is
below 3.7V, a warning message will be displayed if set-up
is attempted.
The Actiwave contains a lithium polymer rechargeable
battery. The expected duration of the battery from fully
charged is dependent on the type of Actiwave and the
recording mode but is always in excess of 2 days. The
Actiwave may be recharged via the USB port of the Host
PC or using a standard mains adaptor with a USB Type A
connection (e.g. those used with MP3 players etc.).
The Actiwave devices must be correctly oriented and
located in the correct position within the slots of the
interface dock. The Actiwave devices (not Cardio) have a
profiled case to ensure correct orientation. Furthermore,
the Actiwave should always be fitted into the topmost
position within the slot (see figures below). Always take
care to align the pins with the holes inside the slot and do
not use excessive force or the pins may be damaged.
Single
Channel
1
2
4
Two
Channel &
Motion
1
2
4
4
Four
Channel
1
2
Page 14
Advertisement
Table of Contents
