Introduction To The Actiwave System; An Overview Of The Actiwave System; Components Required For A System; The Actiwave Recorders - CamNtech The Actiwave User Manual

1 Introduction to the Actiwave System

1.1 An Overview
of the
Actiwave
System

Components required for a system

The Actiwave Recorders

1 Channel ECG/EEG
2 Channel EEG/ECG
4 Channel ECG/EEG
Actiwave User Guide - Issue 2.0.18
The Actiwave system is designed to offer maximum
flexibility for the recording of physiological waveforms.
Instead of one bulky multi-channel recorder, the Actiwave
devices are available in 1, 2 or 4 channels and are
physically small enough to be located close to the
measuring electrodes.
The Actiwave system consists of 3 main components:
 One or more Actiwave recorders with appropriate
electrodes.
 USB Interface Dock.
 PC
Software
maintenance functions.
There are five variants of the Actiwave recorder; the basic
functionality of each variant is summarized in the table
below:
Actiwave Model
EEG/ECG 1
[08-514]
EEG/ECG 2
[08-521]
EEG/ECG 4
[08-557]
providing set-up,
Functionality
Single channel
recorder for EEG
or ECG
waveforms.
Dual channel
recorder for 2 x
EEG or
2 x ECG or
1 of each type of
waveform.
Four channel
recorder for EEG
or ECG waveforms
in any combination.
download and
Memory Recording
Time *
16Mb 36 hours
24Mb 27 hours
24Mb 13 hours
Page 6