Omron FHV7H-C004-H19-MC Hardware Setup Manual page 70

3 Configuration
Series
Type
Model
External Serial Communication
Interface
Ethernet
Communi-
cation
EtherNet/IP Communi-
cation
PROFINET Communi-
cation
EtherCAT Communi-
cation
Parallel I/O
Encoder Interface
Monitor Interface
USB I/F
SD Card I/F
Indicator Main
Lamps
Ethernet
SD Card
EtherCAT
Supply Voltage
•
Current
When connecting an
consump- intelligent compact
tion
digital camera
•
When connecting
the following lighting
or lighting control-
lers without an ex-
ternal power supply
- FLV-TCC1
- FLV-TCC4
- FLV-TCC3HB
- FLV-TCC1EP
- FL-TCC1
•
When connecting
the following lighting
or lighting control-
lers
- FL-TCC1PS
- FL-MD£MC
Other than above
3-12
FH-L550
RS-232C x 1
Protocol Non-procedure (TCP/UDP)
I/F 1000BASE-T x 1
Yes (Target/Ethernet port)
•
Yes (Slave/Ethernet port)
•
Conformance class A
None
High-speed input: 1
Normal speed: 9
High-speed output: 4
Normal speed: 23
None
DVI-I output (Analog RGB & DVI-D single link) x 1
USB2.0 host x 1 (BUS Power: Port 5 V/0.5 A)
USB3.0 host x 1 (BUS Power: Port 5 V/0.5 A)
SDHC x 1
POWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
NET RUN: Green
LINK/ACT: Yellow
SD POWER: Green
SD BUSY: Yellow
None
20.4 VDC to 26.4 VDC
2.7A max.
1.5A max.
FH-L Series
Lite Controller
4.4A max.
2.0A max.
FH Series Vision System Hardware Setup Manual (Z366-E1)
FH-L550-10