Procedure
Testing
↓
Measuring (Opera-
tion)
↓
Management and
Analysis
FH Series Vision System Hardware Setup Manual (Z366-E1)
Description
Execute test measurements.
(In the Main Window (layout 0), click the
Measure button.)
↓
Adjust the parameters for each processing
item.
↓
Click the Data save button.
In the Main Window (layout 0), click the
Switch layout button, and then select
Main Window (Layout 1).
↓
In the Main Window (layout 1), check the
communications with the PLC.
↓
In the Main Window (layout 1), execute
commands from the PLC, such as meas-
urement trigger commands.
Save and analyze measurement data and
images.
2 Overview of FH series
Reference
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series Processing
Item Function Reference Manual (Cat. No.
Z341)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's
Manual (Cat.No. Z365)
Vision System FH/FHV series User's Man-
ual for Communications Settings (Cat. No.
Z342)
Vision System FH/FHV series User's Man-
ual for Communications Settings (Cat. No.
Z342)
Vision System FH/FHV series User's Man-
ual for Communications Settings (Cat. No.
Z342)
2
2-9