Omron FHV7H-C004-H19-MC Hardware Setup Manual page 179

Camera Cable
Right-angle Camera Cable
Bend resistant Camera Cable
Bend resistant Right-angle Camera Cable
Long-distance Camera Cable
Long-distance Right-angle Camera Cable
5-5-3
FH-L Series
Precautions for Safe Use
• Ground
When a base is packed in a camera that will be connected to the Sensor Controller, make
sure to mount the camera using the base. Since the enclosure of the camera body is con-
nected to the internal circuits, mounting the camera without using the base allows the internal
circuits to be directly connected to the ground, which may cause malfunction or failure.
•
• When connect the FH-L series Sensor Controller to the FH-SC12/FH-SM12: 12 mega-
pixels camera
Do not ground the positive terminal of the 24 VDC power supply when connecting the Sensor
Controller and a 12 megapixels camera like FH-SC12 or FH-SM12.
Camera cable mounting
Connect the cable with securing the connector length and the minimum bending radius to the Sensor
Controller.
Connector length
Minimum
bending radius
*2. Each camera cables has polarity. Please ensure that the name plate side of the cable is connected
to the controller.
Camera Cable
Right-angle Camera Cable
Bend resistant Camera Cable
Bend resistant Right-angle Camera Cable
FH Series Vision System Hardware Setup Manual (Z366-E1)
Name
FZ-VS3
FZ-VSL3
FZ-VSB3
FZ-VSLB3
FZ-VS4
FZ-VSL4
Name
FZ-VS3
FZ-VSL3
FZ-VSB3
FZ-VSLB3
Minimum bending
Model
radius
69 [mm]
78 [mm]
Minimum bending
Model
radius
69 [mm]
5 Setup and Wiring
Connector length
30 [mm]
42 [mm]
Connector length
30 [mm]
5-25
5