Management; Time & Schedule; Time - D-Link DSL-X1852E User Manual

Section 4 - Configuration
The Time page allows you to configure, update, and maintain the correct time
for the internal system clock. From here you can set the time zone and the
Network Time Protocol (NTP). To access this page, go to Management > Time
& Schedule.
Auto Sync Enable or disable automatic synchronization of the date and time
Network Time
with a Network Time Protocol (NTP) server.
Server:
Auto Sync Time Enable or disable automatic time zone selection. If this is disabled,
Zone: select your time zone in the following Time Zone drop-down list.
System
Displays the current system date and time.
Date&Time:
NTP Server/2 Select the NTP server address from a list of available NTP servers. If
Address: you selected Other, enter the NTP server in the field. Adding a second
server is optional. Select None if you don't want to specify a backup
NTP server.
Click Save when you are done. To configure and manage the schedule, click
the Schedule tab and refer to Schedule on page 84.
D-Link DSL-X1852E User Manual

Management

Time & Schedule

Time

83