Tr069 - D-Link DSL-X1852E User Manual

Section 4 - Configuration
TR069 allows for automatic configuration between an auto-configuration
server (ACS) and your router. To access this page, go to Features > TR069.
Please check with your service provider, or leave the settings at their defaults
if you are not sure.
TR-069
CWMP: Activate or deactivate CPE WAN Management Protocol (CWMP)
ACS
URL:
Specify the URL of the
with http://
Username: Enter the username to log in to the ACS remote server.
Password: Enter the password to log in to the ACS remote server.
Connection Request
Connection Specify the request path here.
Request Path:
Username: Enter the username for connection request sent from the ACS remote
server to the router.
Password: Enter the password for connection request sent from the ACS remote
server to the router.
Periodic Inform: Activate or deactivate the periodic inform function.
Interval: Specify the interval in seconds for each inform packet (1-999999).
The default is 43200.
Authentication Select either Server or Client authentication method.
Mode:
Enable Certificate Enable or disable certification for authentication.
Function:
D-Link DSL-X1852E User Manual
auto-configuration server (ACS), starting
.

TR069

76