D-Link DSL-X1852E User Manual page 18

Section 2 - Installation
Use the DSL-X1852E as both a modem and router. Plug one end of the supplied
3-1
port on the back of the router and the other end into the telephone wall jack with the supplied microfilter installed in
between.
a. Connect the supplied microfilter to your telephone wall jack with the
cable labelled WALL SOCKET.
WALL JACK
Use the DSL-X1852E as a router only. Plug one end of the supplied Ethernet cable into the WAN port on the back
3-2
of the router and the other end to your existing cable/UFB/NBN™ connection box or modem. Then power on the
connection box.
D-Link DSL-X1852E User Manual
b. Connect the supplied phone cable from the MODEM port on the
microfilter to the DSL port of the router.
nbn™ connection box
PC
DSL phone cable into the DSL
WALL JACK
12