Ipsec - D-Link DSL-X1852E User Manual

Section 4 - Configuration
IPSec facilitates VPN communications with security capabilities. This page
allows you to create an IPSec tunnel between two sites and set parameters for
authentication method and encryption algorithm.
Click Add Rule and configure the following to set up an IPSec profile for VPN
connections:
IPSec Settings
Connection Name: Name this IPSec connection.
Local Gateway IP: Enter the IP address of the local gateway for this tunnel.
Remote Gateway Enter the IP address of the remote gateway for this tunnel.
IP:
Local Access Select either Single IP or Subnet. Note that the local and remote
Range: access range should use different subnetworks.
Local IP Address:
Enter the IP address of the local device that can use this tunnel.
IP Subnet Mask: Enter the subnet mask if you choose Subnet for Local Access Range.
Remote Access Select either Single IP or Subnet. Note that the local and remote
Range: access range should use different subnetworks.
Remote IP
Enter the IP address of the remote device that can use this tunnel.
Address:
IP Subnet Mask: Enter the subnet mask if you choose Subnet for Remote Access Range.
D-Link DSL-X1852E User Manual

IPSec

43