D-Link DSL-X1852E User Manual page 19

Section 2 - Installation
Connect the supplied power adapter to the router and a power outlet, and press the power button. The device LEDs
4
will light up. Wait approximately three minutes before proceeding to the next step.
Caution: Use only the included power adapter with this product.
POWER OUTLET
Plug one end of the supplied Ethernet cable into a yellow Ethernet port on the back of the router, and the other end
5
into the Ethernet port on your computer.
If you are setting up the DSL-X1852E using a laptop or mobile device, connect to it using the Wi-Fi network name
and password printed on the label attached to the bottom of your device.
NB
D-Link DSL-X1852E User Manual
DSL-X1852E
DSL-X1852E
Power
WALL JACK
DSL
PC
PC
13