D-Link DSL-X1852E User Manual page 38

Section 4 - Configuration
If you selected CBR, NRT-VBR, or RT-VBR, configure the following additional
options:
Peak Cell Rate Enter the Peak Cell Rate in cells per second (0-5500).
(PCR):
If you selected NRT-VBR or RT-VBR, the additional following options are
available:
Sustainable Cell Enter the Sustainable Cell Rate in cells per second (0~5500).
Rate (SCR):
Maximum Burst
Enter the Maximum Burst Size in MB per second (0~5500).
Size (MBS):
VLAN Settings
Enable Vlan ID Enable or disable VLAN settings.
Vlan ID Enter the VLAN ID. Enter a value from 1 - 4094.
To set your IPv4/IPv6 connection parameters of WAN connection, refer to
Connection Types on page 35.
D-Link DSL-X1852E User Manual
Internet - ADSL (continued)
32