D-Link DSL-X1852E User Manual page 55

Section 4 - Configuration
Clicking Advanced Settings allows you to manually configure security,
wireless radio operation, and schedule settings.
Choose None, WEP (WEP-128Bit, WEP-64Bit), WPA (WPA3, WPA2,
Security:
WPA or WPA3/WPA2, WPA2/WPA). Select None for unsecured
network if it is what you intend.
Wi-Fi Protected Access (WPA) offers stronger encryption capability than WEP.
Using WPA3 with AES encryption is recommended. WPA3 provides the latest
and most robust encryption among these security methods.
Security: WPA3, WPA2, WPA or mix of WPA3/WPA2, WPA2/WPA.
WPA Type
802.1x uses a RADIUS (Remote Authentication Dial-In User Service) server for
user authentication. If you selected 802.1x, the following options are available:
Server IP Address: Enter the IP address of the RADIUS Server.
Port: Enter the port used by the RADIUS Server.
Secret: Enter the secret used by the RADIUS Server.
Cipher Type: Select either AES, TKIP or Both (AES/TKIP). The options vary
depending on the WPA type selected. AES is recommended if other
types are presented.
Group Key
Enter the Group Key Interval as the timing for rekeying the group
Interval: temporal key. The default is 3600 seconds.
D-Link DSL-X1852E User Manual
Advanced Settings
WPA
49