ClearSounds PHONE A1600 Operating Manual page 81

Using the base to record "ANS & REC" (called Recorded OGM):
1. Press
the main menu list.
2. Press to scroll to TAM setup and then press
the word Select.
3. Press
under the word Select.
4. Press to choose Record OGM and then press
the word Select. Speak clearly into the microphone, which
is located below the Redial button. The display will show
"Recording".
5. You can record your OGM after the tone. Recording will
stop automatically after 1 minute. You can also confirm
and end the recording by pressing
The new OGM will be played after the recording.
Sample ANS & REC message:
Hi, this is (use your name here), I can't answer the phone
right now so please leave your name, number and a brief
message after the tone and I'll get back to you. Thank you.
Using the Handset to record "Answer only":
The default announcement is "Hello, your call cannot be
taken at the moment. Please call back later." To change the
message:
1. Press
menu list.
2. Press up
and then press
3. Press down
under the word Select.
4. Press
5. Press down
under the word Select.
6. Record your announcement after the tone. Recording will
stop automatically after 1 minute or you can confirm and
end the recording by pressing
During the recording, the LCD will show "Recording..."
under the word Menu on the screen to display
to choose Outgoing Msg and then press
under the word TAM to display the TAM main
or down
under the word Select.
to select Announce and then press
under the word Select to select Answer Only.
to select Record MESS and then press
to scroll to TAM Settings
under the word Select.
81 – ENGLISH
under the word End.
under
under