Out of Range Alarm
█
This function allows you to know when the handset is out of
range of the base, and a beep will sound. Your ClearSounds®
A1600 comes from the factory preset for Out of Range Alarm
ON. To change this setting:
1. Press
the main menu list.
2. Press up
press
3. Press up
press
4. Press down
under the word Select.
5. Press up
under the word Select.
Dialing Mode
█
Your ClearSounds® A1600 comes from the factory preset for
touch-tone service. Should you need to change this setting
based on the type of phone service you have, use Tone for
touch-tone service or Pulse for rotary dialing. NOTE: If you
are not sure which dialing mode to select, please contact your
local phone service provider. To change this setting:
1. Press
the main menu list.
2. Press up
press
3. Press down
under the word Select.
4. Press up
press
under the word Menu on the screen to display
or down
under the word Select.
or down
under the word Select.
to select Range Alarm and then press
or down
under the word Menu on the screen to display
or down
under the word Select.
to select Dial Mode and then press
or down
under the word Select.
to scroll to HS Settings and then
to scroll to Tone Setup and then
to select On or Off and then press
to scroll to BS Settings and then
to select Tone or Pulse and then
52 – ENGLISH