ClearSounds PHONE A1600 Operating Manual page 53

Call Waiting (Flash)
█
Your ClearSounds® A1600 comes from the factory preset for
Flash Time to 600ms. Flash timing is the signaling process
that tells the phone system when a phone is on hook or off
hook. The United States uses a 600ms timing sequence. The
European Union uses a 300ms timing sequence.
choose from 100ms, 300ms or 600ms. To change this setting:
1. Press
the main menu list.
2. Press up
press
3. Press down
under the word Select.
4. The display shows the current setting. Press up
to choose from 100ms, 300ms, or 600ms and then
press
Note: If you subscribe to Call Waiting on Caller ID, you will
receive Caller ID information (if available) on Call Waiting calls
(see page 68).
If you subscribe to Call Waiting service from your local phone
provider, during a phone call you will hear a beep to indicate
another call is waiting on the line.
1. To connect to the waiting call, press
Flash, and your original call is put on hold. The display
will show R.
2. To switch between the two calls, press
word Flash.
under the word Menu on the screen to display
or down
under the word Select.
to select Flash Time and then press
under the word Select.
to scroll to BS Settings and then
53 – ENGLISH
You can
or down
under the word
under the