ClearSounds PHONE A1600 Operating Manual page 57

1. Press
the main menu list.
2. Press up
press
3. Press down
under the word Select.
4. Press
down
the word Select.
5. Press up
from Melody 1-Melody 10. When adjusting the Melody,
the handset plays the selected melody.
6. Press
7. To adjust the volume level, select Ring Volume and then
press
the volume from Volume 1-Volume 5, or Off. When adjusting
the Volume, the handset plays the selected loudness.
8. Press
Note: If you set the volume to "Off", when a call comes in, only
the New Call information appears on the LCD and the phone
will not ring.
Visual and Vibrating Ringer
You can activate the visual ringer and vibrating handset
function. A bright LED light will flash and the handset will
vibrate when the phone rings. To turn this feature on/off:
In standby mode, press and hold
to activate and press and hold
under the word Menu on the screen to display
or down
under the word Select.
to scroll to Ring Setup and then press
under the word Select to select INT Ring or press
to select EXT Ring, and then press
or down
under the word Select.
under the word Select. You can select and adjust
under the word Select.
to scroll to HS Settings and then
to select the ring tone
until the
again to deactivate.
57 – ENGLISH
under
icon appears