ClearSounds PHONE A1600 Operating Manual page 72

Adding Phonebook Entries
█
1. Press
the main menu list.
2. Press down
under the word Select.
3. The display shows the first entry already in the Phonebook.
4. Press
"Add". Press
5. The display shows "Name?". Enter the name you want to
use and then press
shows "Number?". Enter the desired number (up to 24
digits) and then press
6. Press up
10 and then press
to set a VIP number, you should select a special Melody
ring tone for it. This ring tone should be different than the
EXT Ring tone you have set.
7. Repeat if necessary.
Note: If you make a mistake while entering a name or a
number, press
you press this key, the last digit is deleted. To clear all digits,
press and hold
Using a Pause
█
(used when entering a phonebook entry or M1-M4 memory
dial entry) You can insert one 3 second pause into dialing or
memory storage in order to access custom and telebanking
services, long distance, calling cards, etc. Press right
the navigation key at the desired point in the number to insert
the pause and the letter P will appear at the pause entry.
Viewing Phonebook Entries
█
1. In standby mode, press down
2. Press up
the desired entry is displayed.
under the word Menu on the screen to display
to choose Phonebook and then press
under the word Select and the display shows
under the word Select.
or down
under the word Erase to correct it. Each time
under the word Erase.
or down
under the word Save. The display
under the word Save.
to select from Melody 1 – Melody
under the word Select. If you want
to enter the phonebook.
to scroll through the list until
72 – ENGLISH
on