ClearSounds PHONE A1600 Operating Manual page 63

For optimal speakerphone performance, avoid the following:
• Areas with high background noise (The microphone might
pick up these sounds and prevent the speakerphone from
going into the receiving mode when you finish talking).
• Surfaces affected by vibration.
• Recessed areas such as in a corner, under a cupboard, or
next to a cabinet, which can generate an echo effect.
Answering a Call from the Cordless Handset
█
Cordless Handset out of the base
1. To answer a call, press
2. Adjust your volume and tone settings if needed.
3. To end the call, press
Cordless Handset in the base
1. If you
(see page 58), simply lift the handset out of the base
and speak into the handset.
2. If you have not activated the Auto Answer function, lift
the handset out of the base and press
into the handset.
3. Adjust your volume and tone settings if needed.
4. To end the call, press
the base.
After you hang up, the LCD will display the call duration.
During the call, the base LCD will display the call duration.
Making a Call from the Cordless Handset
█
1. Pick up the handset and press
on the LCD. Listen for a dial tone.
2. Dial a number. If you make a mistake while entering a
number, hang up and begin again.
3. Adjust your volume and tone settings if needed.
4. To end the call, press
have activated
and speak into the handset.
or replace the handset to the base.
the Auto
or replace the handset to
. The
or replace the handset to the base.
63 – ENGLISH
Answer function
and speak
icon appears