ClearSounds PHONE A1600 Operating Manual page 30

Dialing Mode Setting
█
Your ClearSounds® A1600 comes from the factory preset for
touch-tone service. Should you need to change this setting
based on the type of phone service you have, use Tone for
touch-tone service or Pulse for rotary dialing.
NOTE: If you are not sure which dialing mode to select, please
contact your local phone service provider.
setting:
1. Press
the main menu list.
2. Press to scroll to Set Phone and then press
the word Select.
3. Press or
under the word Select.
4. Press or
the under the word Save.
Call Waiting (Flash)
█
Your ClearSounds® A1600 comes from the factory preset for
Flash Time to 600ms. Flash timing is the signaling process
that tells the phone system when a phone is on hook or off
hook. The United States uses a 600ms timing sequence. The
European Union uses a 300ms timing sequence. You can
choose from 100ms, 300ms or 600ms. To change this setting:
1. Press
the main menu list.
2. Press to scroll to Set Phone and then press
the word Select.
3. Press or
under the word Select.
4. The display shows the current setting. Press
choose from 100ms, 300ms, or 600ms and then press
under the word Select.
under the word Menu on the screen to display
to scroll to Dialing Mode and then press
to select Tone or Pulse and then press
under the word Menu on the screen to display
to scroll to Set Flash and then press
30 – ENGLISH
To change this
under
under
or to