ClearSounds PHONE A1600 Operating Manual page 38

Method 2:
1. Use the keypad to enter the number you want to store. You
can use
2. Press and hold one of the Memory dial keys for at least 2
seconds, and the display will show the number you have
entered. Press
3. The display will show "Name:" Enter the name you want to
use and then press
4. The display will show the list of ring tones to select
from. Press
adjusting the Melody, the handset plays the selected
melody. Press
5. Repeat for each Memory dial key you want to use.
Dialing from Memory Numbers
1. In standby mode, press one of the Photo Dial keys, the display
will show the corresponding number. If you selected the
wrong memory dial, either select the correct memory dial or
press under the word Clear repeatedly until you get back
to the main screen.
2. Press the Speaker key and the phone will begin to dial.
NOTE: Entering a new number in the same location will
automatically erase the previous number.
Erase Memory Numbers
1. Press
2. Press or
entry, and then press
3. Press or
the word Select and the entry will be immediately deleted.
4. Repeat for each entry to be erased.
Inserting Photos in Memory Keys
█
1. Cut your photo using the template provided as a guide.
2. Remove the transparent cover of the memory key and insert
the photo and replace the cover or slide the photo in the
top slot of the cover.
under the word Clear to edit the number.
under the word Save.
or to select the desired ring tone. When
under the word Select.
under the word PhoneBk to enter the phonebook.
repeatedly until you reach the desired
to scroll to Erase and then press
under the word Save (see page 44).
under the word Options.
38 – ENGLISH
under