Tripp Lite BP240V09 Owner's Manual page 45

5. Installation
11. Connect the cables from battery 1+ to BAT+ bus bar, battery 10- to BATN bus bar, battery 11+ to BATN bus bar, battery
20- to BAT- bus bar and the layer connect cables (Figures 5-41A and 5-41B).
Notes:
• For these connections, refer to the wiring diagram in Figure 5-41C.
• This manual may be downloaded in color at tripplite.com, which shows the cables in corresponding colors:
Red = Positive
Blue = Center Tap
Black = Negative
Figure 5-41A
Figure 5-41B
45