Dimplex ZWU 06E Installation And Operating Instructions Manual page 33

Information
Target charge rate acc. heat demand
Menu → Information → System state
Displays the internally calculated target charge rate based on the heating characteristic curve, heat demand factor, heat level that is currently set,
and any control value that may have been stipulated by the energy supplier in the schedule. (For the output target charge rate, please see the
display on the idle mode screen)
Runtime (only shown with the classic charging model)
Menu → Information → System state
Displays the hours that have passed in the classic charging models of forward/backward control since the start of the night-time charge release.
Total release duration per day (only shown with the intelligent charging model)
Menu → Information → System state
Displays the total number of hours that the release memory of the intelligent charge model has recorded as the release period over the past
24 hours.
Serial number
Menu → Information → Device data
Displays the ten-digit serial number of the control unit.
Version
Menu → Information → Device data
Displays the software version and build number (four digits) of the software.
Set passwords
Menu → Information → Set passwords
For setting passwords for individual menu areas.
33