Dimplex ZWU 06E Installation And Operating Instructions Manual page 32

Holiday program
The holiday program can be used to adjust the heat level for periods when the user will be absent. The start and end of the holiday period and the
desired heat level need to be set.
The holiday program takes priority over the active week program, i.e. it overrides the current week program.
Once the holiday period has elapsed, the week program that was being used before is reactivated.
32
Setting the holiday program on the control unit:
1. Select Menu → Operation → Holiday program.
2. The Start of holiday screen appears.
3. Press Chng.
4. Using the plus or minus key [+/-] and the arrow key [>], set the desired start point.
5. Press Save.
6. Press the down arrow .
→ The End of holiday screen appears.
7. Press Chng.
8. Using the plus or minus key [+/-] and the arrow key [>], set the desired end point.
9. Press Save.
10. Press the down arrow .
→ The Heat level holiday screen appears.
11. Press Chng.
12. Using the plus or minus key [+/-], set the desired control mode during the holiday period.
13. Press Save.
→ The holiday program has now been activated automatically. The desired operating mode will be switched on
at the set start time, and switched back off at the set end time.
If you wish to delete a configured holiday program or end it early, set the end time to a time in the past.