System Type; Type Of Summer Time - Dimplex ZWU 06E Installation And Operating Instructions Manual

System type

Menu → Installer → Startup
This menu item can be used to set multiple parameters simultaneously to configure one of the typical system configurations for electric storage
heating systems. The setting covers the system type (storage heaters, underfloor heating), if applicable the controller type in the storage heater
(thermo-mechanical, electronic), and the type of control signal (duty cycle, DC) and its features.
All settings can also be made and changed individually in the menu item Installer → Detail settings.
Factory setting: preset with Chng and [+/-] (display of placeholder only), setting options (available types depending on the unit type):
• Thermo-mech. storage heaters duty cycle system 80%
• Thermo-mech. storage heaters duty cycle system 72%
• Thermo-mech. storage heaters duty cycle system 37%
• Electronic storage heaters duty cycle system 80%
• Electronic storage heaters duty cycle system 72%
• Electronic storage heaters duty cycle system 37%
Date/Time (only shown with the intelligent charging model)
Menu → Installer → Startup
Setting for selecting the current date and the time.
Type of summer time (only shown with the intelligent charging model)
Menu → Installer → Startup
Setting for selecting the automatic switching of summer time.
Factory setting: Europe, setting options: Off | Europe
• Electronic storage heaters DC Dimplex
• Underfloor heating DC Dimplex
• Underfloor heating DC tekmar
• Underfloor heating DC tekmar old
• Underfloor heating DC Dohrenbusch
21