Commissioning Certificate - Dimplex ZWU 06E Installation And Operating Instructions Manual

Commissioning certificate

Level 2 Level 3
Menu – Startup Application range and charging
Installer
Full charging (E1)
Heat demand factor
Sensor type
Control model charge
Runtime
System type
Internet Gateway
Date/Time
Detail settings Application
System
Heat demand
22
Level 4 Domestic control unit
(ACU) (factory setting)
ACU intelligent
-12°C
100%
Dimplex standard sensor DIN
Not present
Not present
Preset with Chng and [+/-]
No
01.01.2001
Application range and charging ACU intelligent
Installation type Storage device
Charge time for 100% charge 8h
Use of fan As required
Control model charge Not present
RT (temperature) reference frost 10°C
protection
RT (temperature) range for heat 10K
level 1.0 - 5.0
Control model for SH contactor SH charge
Sensor type Dimplex standard sensor DIN
Full charging (E1) -12°C
Start of charging (E2) 18°C
Base charge at start of charging 5%
(E15)
Heat demand factor 100%
Building type: Structure and normal + normal
insulation
Outside-temp. (OT) lower limit Off
for blocking high tariff
Substitute temperature 5°C
Correction value for sensor +0K
Classic central charge unit Settings
(CCU)
CCU classic
-12°C
100%
Dimplex standard sensor DIN
Backward
22h
Preset with Chng and [+/-]
Not present
Not present
CCU classic
Not present
Not present
Not present
Backward
10°C
10K
SH release
Dimplex standard sensor DIN
-12°C
18°C
5%
100%
normal + normal
Off
5°C
+0K