Terminal Assignment - Dimplex ZWU 06E Installation And Operating Instructions Manual

Terminal assignment for the ZWU 06E central control unit
* Reserved terminals must not be used as supporting terminals.
** Caution: when commissioning the device, it is essential to set the correct type for the connected sensor!
10
Terminal Function
ZX DC control signal output (+)
Z0 DC control signal output (-)
ZY DC control signal output (day/night) for underfloor charge controller
(reserved*)
Ground
C (reserved*)
FS Frost protection
WF External sensor input**
L Supply voltage
N Supply voltage
Z2~ Control signal output to the storage heaters; internally connected with N
Z1~ Control signal output to the storage heaters; clocked control cable (230V~)
with duty cycle signal
TGN230 (reserved*)
LF Signal input: charge release from network operator
LX Multi-function input; can be assigned various functions via the software (see start signal for
drive (LL) and blocking signal for high tariff (HT))
LZ Signal input: additional release from network operator
SH Switching output for controlling the heating contactor
L Supply voltage
N Supply voltage